- text - Variable in class com.infairy.cocina.SDK.Layout.LayoutImage
-
text
- text - Variable in class com.infairy.cocina.SDK.Layout.LayoutRound
-
text
- text - Variable in class com.infairy.cocina.SDK.Layout.LayoutText
-
text
- text - Variable in class com.infairy.cocina.SDK.Layout.LayoutTouchpanel
-
Text
- textAlign - Variable in class com.infairy.cocina.SDK.Layout.LayoutImage
-
- textAlign - Variable in class com.infairy.cocina.SDK.Layout.LayoutRectangle
-
- textAlign - Variable in class com.infairy.cocina.SDK.Layout.LayoutRound
-
- textAlign - Variable in class com.infairy.cocina.SDK.Layout.LayoutText
-
- THERMO_CONFIGURATION_SET(String, int, int, int) - Method in class com.infairy.cocina.SDK.device.DevicePool
-
Set thermo device's configuration by ZID
設定指定設備ID的溫控組態
- THERMO_GET() - Method in class com.infairy.cocina.SDK.device.deviceImpl
-
get device thermo status,
- THERMO_GET(String) - Method in class com.infairy.cocina.SDK.device.DevicePool
-
Get Thermo state by ZID
讀取指定設備ID的溫控狀態
- THERMO_GET_FAN() - Method in class com.infairy.cocina.SDK.device.deviceImpl
-
Get thermostat fan mode
- THERMO_GET_FAN(String) - Method in class com.infairy.cocina.SDK.device.DevicePool
-
Get FAN mode by ZID
讀取指定的設備ID的溫控FAN Mode值
- THERMO_GET_POINT() - Method in class com.infairy.cocina.SDK.device.deviceImpl
-
Get thermostat point value
- THERMO_GET_POINT(String) - Method in class com.infairy.cocina.SDK.device.DevicePool
-
Get point of thermo device by ZID
讀取指定的設備ID的溫控SET POINT值
- THERMO_SET(int) - Method in class com.infairy.cocina.SDK.device.deviceImpl
-
Set device mode, this method is for ThermoStat only.
- THERMO_SET(String, int) - Method in class com.infairy.cocina.SDK.device.DevicePool
-
Set Thermo device mode by ZID
設定指定設備ID的溫控模式
- THERMO_SET_FAN(int) - Method in class com.infairy.cocina.SDK.device.deviceImpl
-
Set thermostat Fan mode
- THERMO_SET_FAN(String, int) - Method in class com.infairy.cocina.SDK.device.DevicePool
-
Set FAN mode of thermo device by ZID
設定指定的設備ID的溫控FAN MODE值
- THERMO_SET_POINT(int, int, int) - Method in class com.infairy.cocina.SDK.device.deviceImpl
-
Set Thermostat point value
- THERMO_SET_POINT(String, int, int, int) - Method in class com.infairy.cocina.SDK.device.DevicePool
-
Set point of Thermo by ZID
設定指定的設備ID的溫控SET POINT值
- TiltDown(String) - Method in interface com.infairy.cocina.SDK.P2P.CameraInterface
-
tilt down control by camera id
- TiltUp(String) - Method in interface com.infairy.cocina.SDK.P2P.CameraInterface
-
tilt up control by camera id
- TimeStamp - Static variable in interface com.infairy.cocina.SDK.gene.StatusInterface
-
Value time stamp
- TIMEZONE_FORMAT_DAY - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
時間屬性：日期元件-日
Timezone type : Date object format : day
- TIMEZONE_FORMAT_HOUR - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
時間屬性：時間元件-時
Timezone type : TIME object format : hour
- TIMEZONE_FORMAT_HOUR_MINUTE - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
時間屬性：時間元件-時分
Timezone type : TIME object format : hour / minute
- TIMEZONE_FORMAT_HOUR_MINUTE_SECOND - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
時間屬性：時間元件-時分秒
Timezone type : TIME object format : hour / minute /second
- TIMEZONE_FORMAT_MINUTE - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
時間屬性：時間元件-分
Timezone type : TIME object format : minute
- TIMEZONE_FORMAT_MINUTE_SECOND - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
時間屬性：時間元件-分秒
Timezone type : TIME object format : minute /second
- TIMEZONE_FORMAT_MONTH - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
時間屬性：日期元件-月
Timezone type : Date object format : month
- TIMEZONE_FORMAT_MONTH_DAY - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
時間屬性：日期元件-月日
Timezone type : Date object format : month / day
- TIMEZONE_FORMAT_SECOND - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
時間屬性：時間元件-秒
Timezone type : TIME object format : second
- TIMEZONE_FORMAT_YEAR - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
時間屬性：日期元件-年
Timezone type : Date object format : Year
- TIMEZONE_FORMAT_YEAR_MONTH - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
時間屬性：日期元件-年月
Timezone type : Date object format : Year / month
- TIMEZONE_FORMAT_YEAR_MONTH_DAY - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
時間屬性：日期元件-年月日
Timezone type : Date object format : Year / month / day
- TimeZoneID - Variable in class com.infairy.cocina.SDK.property.Property
-
Time Zone of the machine, defaut is Asia/Taipei
- TipImages - Variable in class com.infairy.cocina.SDK.gene.EventP2PDNA
-
Tip Images
- title - Variable in class com.infairy.cocina.SDK.Layout.LayoutTag
-
layout title
- Tools - Class in com.infairy.smarthome.tools
-
Tools
- Tools() - Constructor for class com.infairy.smarthome.tools.Tools
-
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutAnimation
-
Layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutCalendar
-
layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutCamera
-
layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutDateTime
-
layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutField
-
layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutGridview
-
layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutHTML
-
layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutImage
-
layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutInnerLayout
-
Inner Layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutList
-
layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutOption
-
layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutPlayback
-
layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutQRCode
-
Layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutRectangle
-
layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutRound
-
layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutSeekbar
-
layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutSidebar
-
layout axis of top, , default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutText
-
layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutTime
-
layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutTouchpanel
-
layout axis of top, default is 0
- top - Variable in class com.infairy.cocina.SDK.Layout.LayoutWheel
-
layout axis of top, default is 0
- totalChannel - Variable in class com.infairy.cocina.SDK.device.BundleDeviceImpl
-
total channels of device, 0/1 is single channel
- totalChannel - Variable in class com.infairy.cocina.SDK.device.DeviceObject
-
Device channel count
- trigger() - Method in class com.infairy.cocina.SDK.gene.StatusImpl
-
- TRIGGER_CONDITION_BATTERY_LOW - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
連動條件定義：低電量
CONDITION defined: Battery low
- TRIGGER_CONDITION_EQUALS - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
連動條件定義：等於
CONDITION defined: User Defined - Equals
- TRIGGER_CONDITION_HIGHER - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
連動條件定義：高於
CONDITION defined: User Defined - Higher
- TRIGGER_CONDITION_HUMIDITY_HIGHER - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
連動條件定義：濕度高於
CONDITION defined: Humidity higher than
- TRIGGER_CONDITION_HUMIDITY_LOWER - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
連動條件定義：濕度低於
CONDITION defined: Humidity lower than
- TRIGGER_CONDITION_LARGER - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
連動條件定義：大於
CONDITION defined: User Defined - Larger
- TRIGGER_CONDITION_LOWER - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
連動條件定義：低於
CONDITION defined: User Defined - Lower
- TRIGGER_CONDITION_LUMINANCE_HIGHER - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
連動條件定義：亮度高於
CONDITION defined: Luminance higher than
- TRIGGER_CONDITION_LUMINANCE_LOWER - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
連動條件定義：亮度低於
CONDITION defined: Luminance lower than
- TRIGGER_CONDITION_METER_CURRENT_HIGHER - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
連動條件定義：電流高於
CONDITION defined: Current higher than
- TRIGGER_CONDITION_METER_CURRENT_LOWER - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
連動條件定義：電流低於
CONDITION defined: Current lower than
- TRIGGER_CONDITION_METER_WATT_HIGHER - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
連動條件定義：瓦特數高於
CONDITION defined: Watt higher than
- TRIGGER_CONDITION_METER_WATT_LOWER - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
連動條件定義：瓦特數低於
CONDITION defined: Watt lower than
- TRIGGER_CONDITION_SMALLER - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
連動條件定義：小於
CONDITION defined: User Defined - Smaller
- TRIGGER_CONDITION_TEMPERATURE_HIGHER - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
連動條件定義：溫度高於
CONDITION defined: Temperature higher than
- TRIGGER_CONDITION_TEMPERATURE_LOWER - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
連動條件定義：溫度低於
CONDITION defined:Temperature lower than
- TRIGGER_TYPE_BATTERY_CHANGED - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：電池電量改變
Device Trigger type: Battery Changed
- TRIGGER_TYPE_DETECTOR - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：偵測器觸發，警報不受佈防或撤防功能限制
Device Trigger type: Detector Type, trigger was not limited by set arm or dis arm
- TRIGGER_TYPE_DEVICE_PROFILE_CHANGED - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：設備內容值改變
Device Trigger type: device profile changed
- TRIGGER_TYPE_HUMIDITY_VALUE_CHANGED - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：濕度計數值改變
Device Trigger type: Humidity value changed
- TRIGGER_TYPE_LEVEL_CHANGED - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：設備數值改變
Device Trigger Status Changed defined: Level value changed
- TRIGGER_TYPE_LIFTED_ALL_BY_MANUAL - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：手動解除所有警報
Device Trigger type: Lift all sensor alarm by manual
- TRIGGER_TYPE_LIFTED_BY_MANUAL - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：手動解除警報
Device Trigger type: Lift single sensor alarm by manual
- TRIGGER_TYPE_LIFTED_BY_SYSTEM - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：系統自發解除警報
Device Trigger type: Lift single sensor alarm by System
- TRIGGER_TYPE_LUMINANCE_VALUE_CHANGED - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：亮度計數值改變
Device Trigger type: Luminance value changed
- TRIGGER_TYPE_METER_CURRENT_CHANGED - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：電流數值改變
Device Trigger type: Current value changed
- TRIGGER_TYPE_METER_KVAH_CHANGED - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：KVAH數值改變
Device Trigger type: KVAH value changed
- TRIGGER_TYPE_METER_KWH_CHANGED - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：仟瓦數值改變
Device Trigger type: KWH value changed
- TRIGGER_TYPE_METER_VOLTAGE_CHANGED - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：電壓數值改變
Device Trigger type: Voltage value changed
- TRIGGER_TYPE_METER_WATT_CHANGED - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：瓦特數值改變
Device Trigger type: Watt value changed
- TRIGGER_TYPE_MULTILEVEL_VALUE_CHANGED - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：微調設備值改變
Device Trigger type: Multilevel value changed
- TRIGGER_TYPE_NORMAL - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：傳感器正常
Device Trigger type: Sensor Normal
- TRIGGER_TYPE_PM25_VALUE_CHANGED - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：PM2.5數值改變
Device Trigger type: PM2.5 value changed
- TRIGGER_TYPE_SENSOR - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：傳感器觸發但是僅為偵測而非警報類
Device Trigger type: Sensor Type
- TRIGGER_TYPE_SOFTWARE - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：軟體類設備
Device Trigger type: Software type.
- TRIGGER_TYPE_SWITCH_OFF - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：開關關閉
Device Trigger type: Switch OFF
- TRIGGER_TYPE_SWITCH_ON - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：開關開啟
Device Trigger type: Switch ON
- TRIGGER_TYPE_TEMPERATURE_VALUE_CHANGED - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：溫度計數值改變
Device Trigger type: Temperature value changed
- TRIGGER_TYPE_TRIGGER - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：傳感器觸發
Device Trigger type: Trigger
- TRIGGER_TYPE_USERDEFINED - Variable in class com.infairy.cocina.SDK.device.DevicePool
-
設備觸發類型：自定設備
Device Trigger type: User-defined type.
- TriggerAlias - Variable in class com.infairy.cocina.SDK.gene.IFTTTDNA
-
Trigger alias for user recognized.
- TriggerCondition - Variable in class com.infairy.cocina.SDK.gene.IFTTTDNA
-
- Type - Variable in class com.infairy.cocina.SDK.device.DeviceObject
-
device brand type
- Type - Variable in class com.infairy.cocina.SDK.gene.EventHardwareDNA
-
Hardware changed: type, we now defined two type of hardware event:
BROADCAST_APP_GUESTURE_INDEX : Users guesture
BROADCAST_MANUAL_OP : User clicked
- TYPE - Variable in class com.infairy.cocina.SDK.gene.EventP2PDNA
-
- TYPE - Variable in class com.infairy.cocina.SDK.gene.EventSensorDNA
-
Trigger data type